THE WALL-special high density foam 350x250x6 mm

"The Wall" - special high density foam
^{Images show application and processing examples. The product is unprocessed!}

• thickness 6 mm
• sheet 350x250 mm

Rigid polyurethane foam perfect for constructing buildings, bridges, roads, walls, roadbeds and many other architectural elements. It can be cut easily with just a cutter or a balsa cutter and can be engraved and sculpted with an awl, reproducing patterns of any type with fine detail: pavements, cobblestones, brick or stone walls...

"The Wall" is glued with white vinyl glue (Titans Hobby ref. TTH502), is a resistant material, is not afraid of water and humidity and is very light, thus allowing the modeller to have no limits in the creation of complex dioramas, railway/architectural models and nativity scenes in all scales. "The Wall" generates chips and little dust during processing and is practically odourless.

Available in 35x25 cm sheets with thicknesses from 3 to 20mm.